- Directional Video Condenser Microphone
- Rycote Suspension System
- Mounts to Standard Camera Shoe
- 3.5mm Mini Plug
- Studio-Quality Sound
The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.
The integrated Rycote® Lyre® based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.
By employing a super-cardioid polar pattern the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.
The RØDE VideoMic directional on-camera microphone is designed in Australia.
|Operating Principle||: Line Gradient|
|Diaphragm||: 0.50" (12.70 mm)|
|Polar Pattern||: Supercardioid|
|Frequency Range||: 40 Hz to 20 kHz|
|Equivalent Noise Level||: 20 dB A-Weighted|
|Maximum SPL||: 134 dB SPL 1%|
|Impedance||: 200 ohms|
|Sensitivity||: -38 dB @ 1 kHz, re: 1 V/Pa|
|Power Requirements||: 9 V Battery|
|Low-Cut Filter||: Yes @ 80 Hz|
|Pad|| : Yes, 10 dB
: Yes, 20 dB
|Output Connectors||: 3.5 mm TRS|
|Length||: 2.56" (65 mm)|
|Diameter||: 4.02" (102 mm)|
|Weight||: 6.21 oz (176 g)|
|Package Weight||: 0.85 lb|
|Box Dimensions (LxWxH)||: 11.7 x 5.3 x 3.4"|
1 x Rode VideoMic-R With Rycote Shock Mount
Write Your Own Review
Use spaces to separate tags. Use single quotes (') for phrases.