TONGGU 888 (High Quality) 900ml Spray Foam Glue Sponge Cotton Insulation Foam Adhesive Acoustic Sound Absorber Foam Gam

⚠️⚠️⚠️ TIDAK HANTAR KE SABAH⚠️⚠️TIDAK HANTAR KE SABAH. Sabah and Sarawak order will be cancelled.

✅Size 900ml , bukan yang smaller dan cheaper bottle✅

✅ One bottle can spray Around 150 Keping 30x30cm sound foam ✅

TONGGU 888 900ml Adhesive Spray Insulation Foam and Glue for Sponge, Soundproof, and Acoustic Foam

Manufactures aerosol adhesives for sofas, mattresses and other furniture. It has the characteristics of strong viscosity, high viscosity, low odor, and good heat and cold resistance. At the same time, this product does not contain triphenyl and chlorine solvents. Compared with traditional glue spraying, it is flexible in operation, convenient and economical, and effectively reduces costs.

Directions to use:

1. Before use, the surface of the adherend must be kept clean, dry, free of oil, dust, water, etc., and please shake it up and down vigorously;

2. Place the nozzle at about 20 cm from the adherend (such as sponge) and at about 45 degrees from the surface of the adherend; press down the nozzle to move at the surface of the adherend at a uniform speed to ensure that the amount of glue is uniform and there is no glue accumulation or lack of glue , Unevenness, etc., spray glue on both sides at the same time, and leave it in the air for 1 to 3 minutes. In the weather with low temperature and high humidity, the drying time should be extended appropriately;

3. After use, please turn the can upside down, press the nozzle to spray a little gas, remove the residual glue in the nozzle, and prevent the glue from clogging the nozzle when you use it next time;

*** After the spraying is completed, after a proper drying time (the specific drying time depends on the actual temperature, the fingers are dry and the sticky is strong), then pressure can be applied, and the material can be accurately recommended at one time. The best use temperature is 20~35℃.